Description
Using our experience from high performance technical apparel, the mask is designed to sit comfortably over the face with a large coverage area to provide an effective barrier and we will produce for Male, for Female and for Kids Sizings. The super-soft fabric is breathable, machine washable and constructed in 5 Layers so it allows a filter to be added internally at the front for added protection placed within a pocket which allows insertion/removal as needed .
Of course, you can also wear these on the bike when you go easy.
– These masks are non-returnable and non-refundable.
COMPOSITION:
– Super soft and breathable fabric (80% Lycra/20% Elastan. The Internal Filter x 1 is 100% External Polyester and 100% Internal Polypropylene with a Filtration Value Type of 98%). On this filter, there are 2 sides, the rough side when you feel it with the squares is internal facing and the side with the lines which has a soft feeling is external facing.
– Slot for Replaceable Filters is internal and the filter fits within a pocket to allow for removal/insertion, you should not need to replace it unless it is damaged but we will have filters. (we recommend changing filter after 40 washes)
Method of Disinfection for Re-Use:
– Machine Wash at Max 40c, you can wash many times. Use non-bio and do not use tumble dryer. (we recommend putting inside a net wash bag, replace filter after 40 washes)
– Steam carefully on both sides with a steam Iron for a few minutes. Do not touch the mask directly when doing this. The High temperature of steam is very effective.
– Hand Washable with hot water up to 60/70c. (please be careful)
– Microwave in a closed container in temps around 90c.
– Spray with Water and Denaturated Alcohol 90 or ethyl solution.
– After last use, please put in bag, seal and place in non-recyclable rubbish.
Source: Handmade and Tested in Italy 100%.
